BEETLE - probably the smallest electronic lock in the world

BEETLE

The BEETLE is an electromechanical furniture lock, which is connected either to a SOLO lock or directly to external voltage.
The small, robust design allows a variety of applications from showcases through drawers to caravans or boats.

All versions are equipped with a 1.5 m cable. The length and possible plugs can be adjusted on request.

The housing is made of robust die-cast zinc and the power consumption is 100 to a maximum of 500 mA for 0.3 seconds. If the lock has reached an end position, no electricity flows. If there is a loss of power, the lock remains in the last position.

 

BEETLE SLAVE

The BEETLE SLAVE is usually used in combination with a SOLO lock and can be connected to the back of the SOLO. Alternatively, any other microprocessor may be used for control.

For the 1.5 m cable the following occupancy applies:

  • White – control line, LOW = open, HIGH = close
  • Black center: Plus 3V
  • Black outside: minus GND
Article no:Properties:Material:
BEETLE SLAVELock for combination with a SOLO as a groupDie-cast zinc

BEETLE 3 V / 12 V DC

BEETLE 3V

The BEETLE 3V is operated with a voltage of 2-3 V DC. Usually a switch or a relay is used.

Connection:

  • Blue – GND / Minus
  • Brown – open
  • Black – close

BEETLE 12V

The BEETLE 12 V is operated with a voltage of 8-16 V DC. Usually a switch or a relay is used.

Connection:

  • Blue – GND / Minus
  • Brown – open
  • Black – close
ARTICLE NO:​PROPERTIES:Material:
BEETLE 3VLock with 3 V controlDie-cast zinc
BEETLE 12V Lock with 12 V controlDie-cast zinc

BEETLE BOLT

The BOLT versions of the BEETLE lock have a lengthened bolt. This is up to 3mm beyond the case. These versions are used for locks of drawer slides, central locking rods or hinges.

ARTICLE NO:​​PROPERTIES:Material:
BEETLE SLAVE BOLTLock for combination with a SOLO as a groupDie-cast zinc
BEETLE 3V BOLLock with 3 V control​Die-cast zinc
BEETLE 12V BOLT Lock with 12 V control​Die-cast zinc
Close Menu